Rimfiremagic-logo
 
1x1
1x1
1x1
1x1
 
1px1px1px
1px
  Home          Updated 3rd December 2017

     BETTER LUCK THIS TIME??

You may recall that about one month ago Roger was due to undergo a minor cardiac procedure which was unfortunately cancelled by the hospital on the morning it was planned. This coming Friday (8th December) Sheila will (very hopefully this time) be driving to and from the hospital on two occasions so it will of course mean that our shop will be closed for some time throughout the day. However we cannot be sure when these times will actually be so please bear this in mind if you are planning to drive any distance to see us that day that we may not be available! We apologise for any inconvenience this may cause but we should be open as usual next Thursday and Saturday.

RIMFIRE AMMUNITION IN STOCK

For callers at our shop we ahve just received a large delivery of .22 rimfire ammunition including the following types. Prices are shown per 1,000 but smaller quantities are priced pro rata:

CCI Minimag £98.00      CCI Standard velocity £78.00      CCI Blazer  £65.00     CCI Subsonic HP £110

CCI Subsonic Segmented bullet  £175.00      CCI Velocitor 32gn  £110.00      Lapua SK Plus  £110.00

 RIMFIRE MAGIC ENHANCEMENTS

With around 650 of our Rimfire Magic rifles now sold we have constantly sought to improve the performance and reliability of our flagship product. So we are pleased to announce a couple of upgrades which are now available as options in the receiver unit which is of course the core of the rifle. Firstly we have the latest Competition bolt manufactured by Power Custom in the US which is CNC machined to give the correct headspace of .044" and the rear of the bolt is slightly radiused for easier cocking and smoother cycling.  A titanium firing pin is retained by a pin to assist in preventing the pin from rising away from the rim of the cartridge , it also has the correct firing protrusion at the rear of the bolt to help aid consistent ignition.
Finally a titanium extractor is tuned and installed which helps with both extraction of fired cases and feeding of live rounds. For the immediate future we are only supplying this part as an option when building a rifle. Whilst we are looking at offering this bolt as a replacement part this idea is hampered in that is is deemed to be a controlled part of a firearm and as such cannot be supplied by mail order and in theory would require a variation on the shooter's FAC. Please see our "build list" page for price.

The use of a rotary magazine in rifles such as the Ruger® 10/22® has for many years made a last shot hold open function difficult to achieve. However the recent introduction of second generation CST device from Custom Shooting Technologies in the US has now successfully overcome this difficulty but it MUST be used in conjunction with the Power Custom bolt described above! Price is shown on our "build list"

 

DON'T PANIC !!

A couple of weeks ago we wrote here that we had recently closed for one Thursday afternoon due to a hospital appointment we could not change. However one or two people misread this paragraph and thought we had closed completely ..... ABSOLUTELY NOT TRUE!!!!   So please do not panic as we are still very much here, alive and kicking and deviously planning news of more exciting products to bring you. So please keep checking our site. Finally, in order to quell any rumours out there we will use this opportunity to tell everyone that whilst retirement has been a serious thought for a while now due to our longstanding health issues we will NOT be making a decision on this matter until the end of this year at the earliest and even if we do eventually decide to retire be assured that we will give everyone several months notice of such a major decision.  So don't forget it's BUSINESS AS USUAL here at South Yorkshire Shooting Supplies!

              

 SMITH & WESSON MP-15 RIFLES

We have been overwhelmed by the demand for these rifles since we started to stock them and sadly are now out of stock! However we do have two more batches on the way and have already started to take back orders (with no obligation to purchase!)   Also we have increased the range of models and as well as the Sport and Performance Centre versions we will offer the Magpul MOE M-Lok in black and flat dark earth finish together with 25 round magazines in both colurs.  Prices to be confirmed after we have settled our invoices including the new "security levy" now added by the airlines to all shipments containing firearms!

 

Apparently there were some problems with earlier production rifles which whereby occasionally the extractor would go AWOL during use. Volquartsen Custom now offer a modified extractor which we have in stock at £15 each.

             PRICE INCREASES!

We appreciate this will NOT be welcomed by anyone and whilst we continue to keep our prices down where possible you will no doubt be aware of the dramatic fall in currency exchange rates with the US Dollar and the Euro following the recent Brexit announcement. This means that currently all our imported parts are costing us around 15% - 17% more and that's before Import Duty and VAT are added! Fortunately we purchased a lot of imported parts before the referendum so can keep price increases under control in the short term but we would like to point out that any price increases do NOT mean that we are making more profit from our valued customers and we are confident that most of you will understand this situation is unavoidable. Whilst we are endeavouring to update prices across our site therer will inevitably be one or two (or more!) which are missed so WITH THIS IN MIND PLEASE CHECK WITH US BEFORE ORDERING TO CONFIRM CURRENT PRICES ON OUR PRODUCTS.

                                           
                          MAGPUL HUNTER STOCK

      

Compatible with Remington 700 Short Actions, this stock requires no bedding and is a true “drop-in” solution for the end user. This stock is also M-LOK compatible to accept a broad range of accessories.

Also available is our Bolt Action Magazine Well, which allows the rifle to be used with detachable box magazines without the need for custom inletting.

FEATURES

  • Compatible with standard Remington 700 pattern short actions with stock Remington hinged floorplates. Fits right-hand receivers only
  • Easily upgradeable to removable AICS-spec magazines (5.56x45 or 7.62x51 pattern) with the affordable Magpul Bolt Action Magazine Well available separately
  • Reinforced polymer shell with Type III hard anodized, machine finished, A380 cast aluminum V-bedding block
  • Accepts ALL factory Remington barrels including aftermarket profiles up to a Medium Palma (0.920" dia. 5.50" forward of the breech)
  • Tapered Beam design provides good rigidity through forend and will free-float compatible barrels
  • 60 degree grip angle from bore axis
  • Adjustable LOP from 13.0”-15.0” with included 0.50” Spacers
  • Rubber recoil butt-pad included and optional OEM Butt-Pad Adapter available for use with aftermarket pads
  • Optional High Cheek Riser Kit with 0.50" and 0.75" Risers to adjust cheek weld (Stock comes pre-fitted with 0.25" Riser)
  • Accepts factory and most aftermarket triggers
  • M-LOK™ slots on forend sides and bottom for a wide variety of accessory and sling mounting options
  • Three dimpled drill points to install optional standard swivel studs (#10-32 x 3/8” long dome stud)
  • Push-button QD swivel compatibility in rear with optional Sling Mount Kits
  • Left and Right rear 1-1/4” Footman’s Loops
  • Currently available in black and flat dark earth

    Incredible value at £275 with our offer of two sling swivel studs included at no extra cost!

The Magpul Bolt Action Magazine Well is a drop-in solution for our Remington 700 Hunter Stock for those that are wishing to add detachable box magazine capabilities to their rifle.

By simply removing your OEM bottom metal and our spacer from the Hunter 700 Stock, users can add this reinforced polymer trigger guard and magazine well without the need for custom inletting from gunsmiths. Designed to work with AICS pattern, short action magazines. This kit also includes one Magpul PMAG® 5 7.62 AC.

FEATURES

  • Designed specifically for the Hunter 700 Stock and all short action caliber AICS (Accuracy International Chassis Systems) pattern magazines
  • Installs easily with no gunsmithing required
  • Reinforced polymer construction provides durability with light weight
  • Large trigger guard allows for use with gloves and accepts most factory and aftermarket curved triggers.
  • Steel action screw pillars
  • Low-profile, anti-snag ambidextrous magazine release is made of Melonite® treated steel for wear and corrosion resistance
  • Includes one 7.62x51/.308 Winchester PMAG 5 7.62 AC magazine

    Price £75

          MAGPUL X-22 STOCK

                     

The Hunter X-22 fits standard Ruger® 10/22®  .22 LR pattern rifles with no gunsmithing, and a reversible barrel tray ensures proper fit with factory sporter profile as well as heavy bull barrels.

FEATURES

  • Drop-in design compatible with all factory Ruger 10/22 .22 LR receivers
  • Reinforced polymer construction for strength and durability
  • 60 degree grip angle from bore axis
  • Adjustable LOP from 12.5”-14.5” with 0.50” Spacers
  • Non-slip rubber butt-pad
  • Optional Cheek Riser Kits to raise cheek height 0.25”, 0.50”, or 0.75”
  • Reversible barrel tray accepts all factory barrels as well as aftermarket up to 0.920”
  • Compatible with all capacities of factory Ruger 10/22 magazines
  • M-LOK™ slots on forend sides and bottom for a wide variety of accessory and sling mounting options
  • Two dimpled drill points to install optional standard swivel studs (#10-32 x 3/8” long dome stud)
  • Push-button QD swivel compatibility in rear with optional Sling Mount Kits
  • Left and Right rear 1-1/4” Footman’s Loops
  • Currently available in black, flat dark earth, olive drab and grey at a price of £140

 EXTREME SHOOTING PRODUCTS

Experienced shooters may recall the CG two-stage match trigger for the Remington 700 rifle which disappeared from the market some years ago. The good news is that it has been redesigned to eliminate some minor faults when used in rifles with a magazine fitted and is now available exclusively from us here in the UK. Price £275

  AT LAST! A DROP IN MAGAZINE

   KIT FOR THE REMINGTON  700

How much we have yearned for such a device for many years .... well now it's here!  Designed to fit into most Rem 700 synthetic stocks without any machining or inletting. The makers say that some wooden stocks MAY need some fitting but we have installed this kit into several synthetic stocks (factory, Hogue, Bell & Carlson, Choate and HS Precision so far) Every one has slotted straight home and secured using the standard action screws. The floor plate and magazines are of polymer construction and the short action and long action mags are available in 5 and 10 round capacities. If this isn't enough good news for you then the price certainly should be!   Our price for a floor plate and magazine of your choice is just £110 ..... but in case you think it's a misprint or typographical error but we will say it again anyway ...... £110  Spare magazines are £65 each

                              

                  

                  

                  

   CZ rimfire rifle scope base

Produced by a local craftsman, this base is suitable for most CZ452 and 455 rimfire bolt action rifles. It is manufactured in anodised aluminium and availabe in 11mm and 3/8" dovetail patterns to fit the various model types    Price £48

 

                     

 

   

 

 

            Remington Rifles
Here are some of rifles for sale all of which have had our usual treatment including refaced and crowned barrel where necessary, smoothed bolt rails and adjusted trigger..... all models are suitable as a base for one of our semi-custom rifles or of course may be shot and enjoyed just as they come with our "fettling" procedure!


.223 SPS Tactical 16" threaded barrel, Hogue stock in Ghillie Green. With a 1 in 9 twist barrel this is an excellent choice for vermin or target shooting ..... Currently out of stock but more on the way


.308 SPS Varmint 26" barrel, factory polymer stock .... £750 plain or £800 with threaded barrel


.308 Rem 700 with stainless 24" barrel, 5R rifling with 1 in 11.25 twist barrel, HS Precision stock with threaded barrel ..... £1,200


.223 SPS Tactical 20" barrel, black Hogue stock and 1 in 9 twist barrel (threaded 5/8x18).... £850


.308 VSF stainless steel with 26" fluted barrel, factory synthetic stock ........ £1,000 or £1,100 threaded


.223 Rem 700 with 20" stainless steel threaded barrel in HS Precision stock ..... £1,100

All errors and omissions excepted!


         AR-15 CENTREFIRE RIFLES

The ergonomic virtues of the AR-15 rifle has long been appreciated by those people fortunate to live in a society where law abiding citizens may legally possess semi-automatic centerfire rifles. Sadly of course this no longer means us in the UK!   Having recently assembled our first straight pull AR-15 rifle has emphasised to us just how pleasant this format is to shoot, even if it does remind us that there is little that is new under the sun as owners of turn of the century Schmidt-Rubin rifles will testify! We are pleased that Josh and Jared Eisenach have nominated us as their UK sole distributor and we are using their beautifully machined side cocking upper receivers in our AR-15 rifles     http://eisenacharms.com/

 

          MAGPUL AND HOGUE

Whilst we have been supplying Hogue stocks for the Ruger 10/22® for many years we are now carrying Hogue products for the AR-15 which of course may be used with both centrefire and rimfire AR-15 rifles. We are trying to modify this site to include a page showing the increasing number of Magpul parts and accessories we offer but as we are not exactly high powered technophiles this is currently turning out to be more difficult than we expected .... but we are still working at it!

               BOYDS STOCKS

We are pleased to confirm that our large shipment of Boyds stocks arrived safely and are already selling well. Not only do we have plenty of the Evolution stocks for Rimfire Magic and Ruger 10/22® rifles® but we also have Pro-Varmint stocks for the CZ455 and also some for the earlier CZ452 rimfire bolt action rifles. As well as the black textured finish on the latter we also have some in nutmeg and forest camo finishes too!

Evolution stocks for Rimfire Magic and Ruger® 10/22® rifles are £185 (stock only)






Pro Varmint CZ455 stock in black textured finish ..... £195

Pro Varmint CZ455 stock in nutmeg laminate .... £195

Pro Varmint CZ455 stock in forest camo laminate .... £195


                    EXPORTS

PLEASE, PLEASE NOTE....WE WILL NOT EXPORT ANY GUN PARTS!    THIS INCLUDES RIFLE STOCKS!
We receive several enquiries or orders each week and many foreign customers get quite upset when we won't accept their order as some of the parts they want are not subject to any controls in their own country. This would seem a suitable time to explain why we appear to turn away business so readily, which we can assure you is not our choice! Firstly the UK government lays down very strict export rules and breaches are dealt with severely. However, there is another reason which few people are aware of, namely US government export condtions. Although we acquire several US Export licences on a regular basis each and every licence carries the warning that the items concerned must not be re exported. Once again there are penalties for breaching these restrictions and the indications are that the US government is becoming increasingly concerned over such matters. It will be obvious to most shooters that many gun parts come in to us from the US and whilst we would love to be able to supply parts outside the UK we are sure you will understand that we wish to stay strictly within the law both in the UK and also the US

 

RUGER® 10/22® MAGS IN STOCK

The panic buying of gun parts which has been going on in the US for some while now appears to be abating somewhat and we are currently sitting comfortably on a good stock of 10/22® mags.

    BX-1® 10 round black factory mags ...... £25 each   BX-25® 25 round factory mags ....  £35 each     BX-15®     15 rounds capacity ...... £30 each

The kit comprises three springs and two brass tubes together with comprehensive fitting and safety instructions.  The selection of components permit the shooter to obtain a crisp, single stage trigger pull of less than 2.0 lbs, although we recommend this weight for rifles used in the field for pest control.  With over 4,500 sold we feel we can confidently say that this is pretty much an essential "must have" item for any CZ 452 rimfire rifle! The kit also fits the latest 455 models  Price £15.00 including delivery.

                          Williams Marlin Sights

Yet another popular product which has become difficult to obtain, but we have managed to get our hands on a few of the FP-336TK receiver sights whch simply attach to the rear two holes drilled and tapped in modern Marlin rifles. They include controls for windage and elevation and a .093" aperture and the price is £65   Some shooters prefer a smaller aperture and we offer the .050" one at £12.00

                                         

                                     Williams "Ace in the Hole" sight

A clever idea from Williams Gunsights sees a picatinny rail for use with optical sight but which also incorporates a small adjustable rear sight and a Firesight fibreoptic front sight. So, in the event of a failure with your optical sight you can whip it off and still have some back up iron sights to use!   £55

         

 

 

                   

 

Return to top of page

1px
1px
5px

South Yorkshire Shooting Supplies Ltd, Everill Gate Farm, Broomhill
Wombwell, Barnsley, South Yorkshire. S73 0YQ. England.
Telephone: 01226 756332 Fax: 01226 751321
Opening hours 9.30am - 5.30pm Thur - Sat.

Website design by whizzweb.co.uk
Web site hosted by alpha1techlabs.com
©whizzweb

Valid XHTML 1.0 Transitional